|
|
1. Plug earphones or headphones into recorders output jack. Usually labeled "EAR" on recorder. 2. Press the "record button" or key on the recorder to begin recording. 3. Listen in the earphones to see if you can hear "live audio" / real time coming through. If you can hear what is being recorded through the earphones, the E.F.P. will work fine. If you cannot hear anything, this means the recorder does not have live audio monitoring and the E.F.P. will not work properly. |
Most recorders work fine with the E.F.P. but in rare cases, some recorders do not have live monitoring. We are continually adding to our list of recorders that we know offer this feature and work with the E.F.P. Recorders with live audio monitoring: |
* It is necessary that the recorder being used with the E.F.P. have "live audio monitoring" for the E.F.P. to work properly. The best way to see if your recorder has live audio monitoring is to do the following: |
If your recorder is not listed here, check to see if it has live monitoring. If it does and it is not shown above, feel free to email us by simply clicking the "Contact us" button at the bottom of this page so we can add it to our list. If you have any questions regarding "live audio monitoring" also feel free to send us an email. |
Sony ICD-P520 ICD-P620 ICD-PX720 ICD-PX820 |
Olympus WS-110 WS-210S WS-400S RT EVP |
ZOOM DS-40 |
For best results when using the E.F.P. always check battery in device and recorder, also adjust recorders volume to a higher level if necessary. |
Copyright 2010 All rights reserved EFP / E.F.P. / E.V.P. Field Processor / Device Circuitry Copyright 2009 Larry Odien Pats Pending 2011 |